3dptek logo

Company News

SANDI Technology helped "Advanced Materials and Foundry New Technology Forum and the Tenth Annual Foundry Conference in Tianjin" to be held successfully.

Release time:April 21, 2025
Tianjin 10th Annual Foundry Conference was successfully held 02
On April 19, 2025, "Advanced Materials and Foundry New Technology Forum and the 10th Tianjin Foundry Annual Conference", organized by Tianjin Mechanical Engineering Society Foundry Branch and National Key Laboratory of Advanced Roll Materials and Composite Forming, was held at Beichen Campus of Hebei University of Technology. (hereinafter referred to as "SANDI") participated in the meeting as the support unit of this forum.
The 10th Tianjin Foundry Annual Conference was successfully held.

Figure: SANTI Technology serves asTianjin Mechanical Engineering Society Casting Branch (Tianjin Foundry Society) 10th Council Executive Director Unit

Tianjin 10th Annual Foundry Conference was successfully held 03
In the morning forum on the 19th, Dr. Zong Guisheng, Chairman of SANDI Technology, shared the oversized sand 3D printing solutions. For the aerospace, shipbuilding and heavy industry and other fields have long been plagued by ultra-large castings manufacturing problems, Dr. Zong Guisheng in-depth analysis of the bottlenecks of the traditional process in terms of efficiency, cost and quality, and focused on the revolutionary technological breakthroughs of SANDI Technology's self-developed 4-meter ultra-large-size 3DP sand printer 3DPTEK-J4000.
The 10th Annual Meeting of Tianjin Foundry Academic Conference was successfully held 04
The equipment adopts sandbox-free flexible area molding technology, which breaks through the size limitation of traditional casting, and can support up to 4-meter sand manufacturing. Its core technical advantages are reflected in the following: 1. integrated molding of complex structures: through high-precision nozzles and intelligent algorithms, it realizes one-time molding of large-size, thin-walled, multi-dimensional curved surfaces and complex cavities (such as helical cooling water channels), breaking through the limitations of the traditional process on the design of the space; 2. high efficiency and low cost: compared with the traditional split casting, the production cycle is shortened by more than 50%, for example, a 1.25-ton aluminum alloy casting is compressed from 60 days to 15 days to complete the delivery of the traditional process; 3. economic optimization: the price of the equipment is only comparable to the equipment of the 2.5-meter class, and the open source material process supports the adjustment of the binder and the sand formula on demand, to further reduce the overall cost.

Photo: SANTI's booth, attracting many attendees to stop and exchange ideas

On the evening of 19th, the reception dinner of "3D Empowering Casting" hosted by SANDI Technology was held in Beichen Campus of Hebei University of Technology.
Tianjin tenth casting academic annual meeting was successfully held 06

Photo: Prof. Liu Jinhai, Honorary Vice President of Tianjin Mechanical Engineering Society Casting Branch (Tianjin Foundry Society), and Jiang Qingjie, General Manager of 3D Equipment Department of Beijing SANDI Technology Co.

Tianjin tenth casting academic annual meeting was successfully held 07

Photo: Dinner RaffleWarm atmosphere at the event

[About SANDI TECHNOLOGY 3D Printing Technology, Inc. is a 3D printing equipment and rapid manufacturing service provider, a national specialized, special and new "small giant" enterprise, and a typical application scenario supplier of additive manufacturing of the Ministry of Industry and Information Technology (MIIT). At the same time has laser and binder jet 3D printing equipment and materials technology and application process, three emperor technology business covers the development and production of 3D printing equipment, 3D printing raw materials development and production, 3D printing process technology support services, rapid finished parts manufacturing services, etc., to establish a complete 3D printing additive manufacturing industry chain, widely used in aerospace, electric power and energy, ships, pumps and valves, automobiles, rail transportation, industrial machinery, 3C additive manufacturing typical application scenarios, the Ministry of Industry and Information Technology, and the company is a leading supplier of additive manufacturing, rail transportation, industrial machinery, 3C electronics, education and scientific research, sculpture and cultural creation, rehabilitation and medical industries.

Links:,,,,,
ICP Record: 京ICP备15051811号-1
SANDI Technology helped "Advanced Materials and Foundry New Technology Forum and the Tenth Annual Foundry Conference in Tianjin" to be successfully held - SANDI TECHNOLOGY CO. SANDI Technology helped "Advanced Materials and Foundry New Technology Forum and the Tenth Annual Foundry Conference in Tianjin" to be successfully held - SANDI TECHNOLOGY CO.
en_USEnglish